Getting Started

RDI Acquisition Software vs. RDI Motion Amplification Software vs. RDI Motion Explorer Software vs. RDI Motion Studio Software
What is the difference between the RDI Acquisition Software, the RDI Motion Amplification Software, the RDI Motion Explorer Software and the RDI Motion Stud...
Thu, 9 May, 2019 at 2:06 PM
What is the difference between a Region of Interest (ROI) and Zooming the View?
When using RDI Acquisition Software, if you left-click and drag the cursor on the screen, you will draw a red box. This box becomes the "Region of Inte...
Wed, 13 Sep, 2017 at 2:20 PM
Using the RDI Acquisition and Motion Amplification Software on the Microsoft Surface Book as a Tablet
For Video Acquisition - You can't use the tablet without the keyboard attached, because you need the USB ports. But, if you detach the tablet from the k...
Wed, 13 Sep, 2017 at 2:16 PM
There is no picture on the computer screen with the camera connected and the Acquisition Software open. What could be wrong?
Check things in this order: Make sure that the lens cover is removed (OK we'll give you this one, but we had to mention it!) Adjust the apertur...
Fri, 15 Sep, 2017 at 2:57 PM
How is Iris M Software installation controlled?
During installation, the software contacts the RDI server and validates that installation on that computer. This is true for both the Acquisition and Motion...
Wed, 13 Sep, 2017 at 2:32 PM
My camera (hardware) isn't recognized or I get strange behavior in the software the first time the program runs. What could be wrong?
There are several prerequisite software packages installed with the Iris M software. Some configure the camera, some the video display. In some cases, your ...
Thu, 14 Sep, 2017 at 9:01 AM
What is an ROI in Motion Amplification lingo?
The Iris M software makes use of a 'Region of Interest' (ROI). This is a small box drawn on the screen at various times during either the Acquisit...
Fri, 29 Dec, 2017 at 4:49 PM
When configuring my recording, how important is the accuracy of the measurements for Distance and Focal Length?
Accurate entries for Distance to target and Focal Length are REQUIRED for accurate displacement measurements. Displacement calculations depend on these entr...
Thu, 14 Sep, 2017 at 11:18 AM
How do I measure displacement (velocity) in a recording?
Select the location that you want to measure. Place the cursor in this location and left-click and drag to create an ROI around this area. The Motion Amplifi...
Thu, 14 Sep, 2017 at 3:05 PM
Can I draw multiple ROIs on a single video?
The short answer is, Yes. But, the details of the update to this feature can be found here: What is the difference between Standard Mode and Accumulate...
Fri, 3 Nov, 2017 at 2:49 PM